High Quality composite material autoclave for carbon fiber
Product Introduction:
The composite material autoclave mainly used to the composite materials military products,space vehicle by high temperature and high pressure.It also can be applied to strengthen the carbon fiber,glass fiber,boron fiber and ect. More over,it also can change the metallic/nonmetallic joint components,such as airplane door,fairing,airborne radar and so on.
System Composition:
Mainly device into below systems:
1.Tightness of tank :it is made from tank ,tank door ,high temperature motor ,air duct heat partition layer to form into one high
pressure resistant ,high temperature tank.
2. Safety interlock : it is made from pressure automatic interlock ,manual interlock ,over pressure alarm device.
3. Quickly open door device :manual or automatic quickly open design ,even If power off ,it can start and close the door.
4. Sealing device: the door adopt silica gel filling air ,it can bear 500 degree ,forming into one high temperature high pressure
sealed container.
5. Pressure system: pressure transfer and control system include air compressor ,storage tank ,pressure control valve ,pipe,pressure transformer ,and pressure gauge .
6. Heating system: stainless steel heating pipe ,high temperature fan ,wind plate,insulation layer temperature control system .heating power satisfy with inside tank max temperature requirement and raising temperature .
7. Temperature circulation system :it made up of circulation fan ,wind plate ,and guide flow cover to improve heating transfer and circulation form into uniform temperature.
8. Vacuum system :it made up of vacuum pump ,pipe ,vacuum gauge ,vacuum vale ,to supply composite material vacuum condition 9.Automatic control system:adopt PLD and fuzzy control ,to realize the pressure ,temperature ,cooling and so on full process high -precision control and in time record.
| TYPE |
1600*2500 |
2000*3500 |
2500*5500 |
3000*6500 |
3500*7500 |
4000*8500 |
| Working Pressure |
3.8MPa |
1.0MPa |
1.0MPa |
1.5MPa |
1.2MPa |
1.2MPa |
| Design Pressure |
4.0MPa |
1.2MPa |
1.2MPa |
1.6MPa |
1.3MPa |
1.3MPa |
| Working Temperature |
400ºC |
250ºC |
250ºC |
250ºC |
250ºC |
250ºC |
| Design Temperature |
420ºC |
270ºC |
270ºC |
270ºC |
270ºC |
270ºC |
| Insulation |
Internal insulation, 200mm |
Internal insulation, 150mm |
Internal insulation, 150mm |
Internal insulation, 150mm |
Internal insulation, 150mm |
Internal insulation, 100-150mm |
| Total Power |
60KW |
90kw |
210kw |
330kw |
510kw |
780kw |
Application:
Widely used in aircraft, missiles, satellites and space shuttle, such as the airplane cabin door, fairing, airborne radar cover, the plane bracket, empennage.Composite material processing. Carbon fiber, boron fiber, aramid fiber, glass fiber, metal composites, reinforced plastics and etc..
Packing:
We usually pack our products by standard export cartons as master carton. We always choose the best and safe packaging material to make sure your orders won't be damaged during delivery.
Company Profile
Shanghai UWANTS Machinery Manufacturing Co.,Ltd.is a professional manufacture of food processing machine and pressure vessel,inculding sterilization autoclave,jacketed pot,vacuum cooling machine,modified atmosphere packaging machine,vulcanization tank,autoclave,animal waste rendering plant,feather meal production line,fish meal production line,wood processing machine etc.
We have many years' experience in this industry. We can produce the machine according to your requirement and production.Please don't hesitate to contact me if you have any question or you are interested in any of our equipment, we will offer the best service to you within 24 hours.
Welcome to visit our company at any time and thanks for visiting our website!
FAQ:
1.What are the payment terms?
TT,L/C and trade assurance are acceptable,TT will be more appreciated,30% deposit before production,70% balance before shipment.
2.What is the delivery time?
At least 2 month after the deposit recipit,depend on how many machines included in the line.
3.How to pack the machine?
Standard packaging
4.How to install after the machines arriving destination?
Our engineer will go to customers site if you need,but need to pay installation fee accord with the contract.
5.What's the capacity you can do?
We always produce depend on customers' requirement.
Contact:
Name:Jack Li
Audited Supplier 
System Composition:
){kind=link}